Tuesday, February 21, 2012

Bind Multiple IP Addresses to a Single Network Interface Card (NIC)

The network scripts are located in /etc/sysconfig/network-scripts/. Go into that directory.

cd /etc/sysconfig/network-scripts/

The file we're interested in is ifcfg-eth0, the interface for the Ethernet device. Let's assume we want to bind three additional IP's (192.168.1.111, 192.168.1.112, and 192.168.1.113) to the NIC. We need to create three alias files while ifcfg-eth0 maintains the primary IP address. This is how we'll set up the aliases to bind the IP addresses.

Adapter IP Address Type

-----------------------------------

eth0 192.168.1.110 Primary

eth0:0 192.168.1.111 Alias 1

eth0:1 192.168.1.112 Alias 2

eth0:2 192.168.1.113 Alias 3

The :X (where X is the interface number) is appended to the interface file name to create the alias. For each alias you create you assign a number sequentially. For this example we will create aliases for eth0. Make a copy of ifcfg-eth0 for the three aliases.

cp ifcfg-eth0 ifcfg-eth0:0
cp ifcfg-eth0 ifcfg-eth0:1
cp ifcfg-eth0 ifcfg-eth0:2

Take a look inside ifcfg-eth0 and review the contents.

more ifcfg-eth0

We're interested in only two lines (DEVICE and IPADDR). We'll rename the device in each file to its corresponding interface alias and change the IP's. We'll start with ifcfg-eth0:0. Open ifcfg-eth0:0 in vi and change the two lines so they have the new interface and IP address.

vi ifcfg-eth0:0

DEVICE=eth0:0

IPADDR=192.168.1.111

Save ifcfg-eth0:0 and edit the other two alias files (ifcfg-eth0:1 and ifcfg-eth0:2) so they have the new interfaces and IP addresses set (follow the table from above). Once you save all your changes you can restart the network for the changes to take effect.

service network restart

To verify all the aliases are up and running you can run ifconfig (depending on how many new IP's you set up, you can use ifconfig | more to pause the output).

ifconfig

You can also test the IP's by pinging them from a different machine. If everything is working then there should be a response back.

ping 192.168.1.111
ping 192.168.1.112
ping 192.168.1.113

0 comments:

Post a Comment