How To add user and root group

gpasswd -a username groupname

gpasswd -a arun root

How to reset forgot MAC root password

1. boot computer and hold the "apple" key and the "s" key.
2. wait for terminal show
3. release keys
4. type without the quotes: "/sbin/mount -uaw"
5. press enter
6. type without the quotes: "rm /var/db/.applesetupdone
7. press enter
8. type without the quotes: "reboot"
9. press enter

this will let you create a new admin account when you reboot your computer.

How to incress swap file size of linux server

dd if=/dev/zero of=/temp/swapfile1 bs=1024 count=6000000 6000000 GB

/sbin/mkswap /temp/swapfile1

/sbin/swapon /temp/swapfile1

/temp/swapfile1 swap swap defaults 0 0


Procedure to add a swap file

You need to use dd command to create swapfile. Next you need to use mkswap command to set up a Linux swap area on a device or in a file.

a) Login as the root user

b) Type following command to create 512MB swap file (1024 * 512MB = 524288 block size):
# dd if=/dev/zero of=/swapfile1 bs=1024 count=524288

c) Set up a Linux swap area:
# mkswap /swapfile1

d) Activate /swapfile1 swap space immediately:
# swapon /swapfile1

e) To activate /swapfile1 after Linux system reboot, add entry to /etc/fstab file. Open this file using text editor such as vi:
# vi /etc/fstab

Append following line:
/swapfile1 swap swap defaults 0 0

So next time Linux comes up after reboot, it enables the new swap file for you automatically.

g) How do I verify swap is activated or not?
Simply use free command:
$ free -m

How to remove Exchange

http://support.microsoft.com/kb/833396

http://support.microsoft.com/kb/310516

Amazon Internal Network Access via Private IP

You will need to add the following rule to your security group to enable ICMP traffic to the host

Protocol : ICMP
From Port : -1
To Port : -1
Source ( IP or group ) : IP_address/32 ( Change the IP_address to be the IP you want to allow traffic from )

For SAMBA you will need to add rules for the following ports
Port 135/TCP, Port 137/UDP, Port 138/UDP, Port 139/TCP, Port 445/TCP

Ffmpeg installtion

FFmpeg (http://ffmpeg.mplayerhq.hu)
Mplayer + Mencoder (http://www.mplayerhq.hu/design7/dload.html)
Flv2tool (http://inlet-media.de/flvtool2)
Libogg + Libvorbis (http://www.xiph.org/downloads)
LAME MP3 Encoder (http://lame.sourceforge.net)
FlowPlayer - A Free Flash Video Player - http://flowplayer.org/
Installing FFMpeg

yum install ffmpeg ffmpeg-devel

If you get package not found, then you will need to add few lines in the yum repository for dag packages installation. Create a file named dag.repo in /etc/yum.repos.d with the following contents on it

[dag]
name=Dag RPM Repository for Red Hat Enterprise Linux
baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag
gpgcheck=1
enabled=1

then

yum install ffmpeg ffmpeg-devel

If everything is fine, then the installation should proceed smoothly. If not you will get something like warning GPG public key missing .
Common Errors

To fix rpmforge GPG key warning:

rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

For more information refer to this faq depending on Centos version

Missing Dependency Error:

If you get missing dependency error like shown below, in the middle of ffmpeg installation

Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package ffmpeg
Error: Missing Dependency: libtheora.so.0(libtheora.so.1.0) is needed by package ffmpeg
Error: Missing Dependency: rtld(GNU_HASH) is needed by package ffmpeg
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package imlib2
Error: Missing Dependency: rtld(GNU_HASH) is needed by package a52dec
Error: Missing Dependency: rtld(GNU_HASH) is needed by package imlib2
Error: Missing Dependency: rtld(GNU_HASH) is needed by package gsm
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package x264
Error: Missing Dependency: rtld(GNU_HASH) is needed by package xvidcore
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package lame
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package a52dec
Error: Missing Dependency: rtld(GNU_HASH) is needed by package faad2
Error: Missing Dependency: rtld(GNU_HASH) is needed by package x264
Error: Missing Dependency: rtld(GNU_HASH) is needed by package lame
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package xvidcore
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package faac
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package faad2
Error: Missing Dependency: libgif.so.4 is needed by package imlib2
Error: Missing Dependency: rtld(GNU_HASH) is needed by package faac
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package gsm
Error: Missing Dependency: libpng12.so.0(PNG12_0) is needed by package imlib2
Error: Missing Dependency: rtld(GNU_HASH) is needed by package libmp4v2
Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package libmp4v2

then most commonly you have GLIB 2.3 installed instead of GLIB 2.4 version. To check the current GLIB version installed on your server. just use

yum list glib*

and it should list the latest GLIB package version.

The reason i was getting this error was my rpmforge packages was pointed to centos 5 versions instead of centos 4.6.

To fix dependency error:

To fix this error, you might need to check your rpmforge packages compatible to the release of your existing CentOS version.
Check the file /etc/yum.repos.d/rpmforge.repo and it should look like for Centos 4.6(Final). If you have lines like http://apt.sw.be/redhat/el5/en/mirrors-rpmforge you might need to make changes to the rpmforge.repos like shown below

Note: Backup the original rpmforge.repo file before you edit its content.

[rpmforge]
name = Red Hat Enterprise $releasever - RPMforge.net - dag
#baseurl = http://apt.sw.be/redhat/el4/en/$basearch/dag
mirrorlist = http://apt.sw.be/redhat/el4/en/mirrors-rpmforge
#mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge
enabled = 1
protect = 0
gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
gpgcheck = 1

To know what linux type and version you are running

cat /etc/redhat-release

Once this is done, do again yum install ffmpeg.

This trick resolved the problem in my linux box running Centos 4.6 and this is the only way i found to install ffmpeg using yum.
To check the FFmpeg working:

Finally, check the ffmpeg whether it is working or not.

> ffmpeg
> ffmpeg -formats
> ffmpeg --help
// This lists path of mpeg, its modules and other path information


ffmpeg -i Input.file Output.file
To check what audi/video formats are supported

ffmpeg -formats > ffmpeg-format.txt

Open the ffmpeg-formats.txt to see the ooutput

D means decode
E means encode
V means video
A means audio
T = Truncated

Set Java path permant in linux

vi /root/.bash_profile


# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi

# User specific environment and startup programs
export JAVA_HOME=/usr/java/jdk1.6.0_16
PATH=$PATH:/usr/java/jdk1.6.0_16


export PATH
unset USERNAME

Set Java path for all user

vi /etc/.bash_profile